#1
Winner
- High-resolution Audio compatible
- Responsive liquid crystal polymer driver for clarity
- Smartphone compatible with in-line remote mic.Cord Length:47-1/4 inch
- Heavyweight bass with beat response control
- Swivel ear cups for portability.In the box: Carrying Pouch, Headphone cable (inline remote and microphone) (approx. 3.94 ft), Balanced-connection headphone cable (approx. 3.94 ft).Connectivity technology : Wired.Frequency Response – 3 Hz –100,000 Hz , Impedance – 16 ohm
#2
- Wireless, on-the-go design delivers the same sonic signature as the wired ATH-M20x professional studio headphones
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils are tuned for enhanced low-frequency performance
- Low latency mode improves synchronicity between audio and video for smooth streaming and gaming
- Multipoint pairing function allows you to stay connected to two Bluetooth devices at once
- Up to 60 hours of continuous use on a full charge and up to 3 hours of use on a 10-minute rapid charge (via USB-C connection)
#4
- Designed to reproduce Hi-Res Audio, allowing you to hear your music the way it was intended
- Exclusive 45 mm True Motion Drivers improve transient response and minimize sound distortion for rich, detailed audio reproduction
- Features multi-layered air damping technology for extended mid-to-low frequency response
- Housings constructed of an aluminum/magnesium mix provide a lightweight, rigid structure that reduce unwanted resonance
- Three precisely placed vents within the layers work to control air flow and improve dynamics
- Highly flexible swivel design, with soft, memory foam earpads and headband ensure comfort even during long listening sessions
- Stainless steel acoustic mesh resistor provides improved high-frequency response, while bass acoustic resistor delivers accurate low-frequency response
#5
- Connectivity Technology: Wired
- Included Components: Headphones, Detachable 1.2 M (3.9′) Cable (A2Dc To 3.5 Mm (1/8″) Gold-Plated Stereo Mini-Plug; Detachable 1.2 M (3.9′) Cable (A2Dc To 4.4 Mm (1/6″), 5-Pole Gold-Plated Balanced Plug), Carrying Pouch
#6
- Neodymium magnets and 40 millimeter drivers for powerful, detailed sound.Specific uses for product : Professional audio system,Home audio system
- Closed ear design provides comfort and outstanding reduction of external noises
- 9.8 foot cord ends in gold plated plug and it is not detachable; 1/4 inch adapter included
- Folds up for storage or travel in provided soft case
- Frequency Response: 10 Hertz to 20 kilohertz
- These large diaphragm, foldable headphones feature a rugged construction, a secure, highly effective closed ear design
- Connectivity technology : Wired
#7
- Lightweight 1.38 in neodymium dynamic drivers deliver a punchy, rhythmic response to even the most demanding tracks. Driver Unit: Dome type.Specific uses for product : Travel
- The swiveling earcup design allows easy storage when you’re not using them, and enhances portability when you’re traveling
- Cushioned earpads for total comfort and enfolding closed-back design seals in sound
- The wide frequency range—spanning 12 Hz to 22 kHz—delivers deep bass, rich midrange, and soaring highs
- Plug: L-shaped stereo mini plug 3.5mm. Impedance (Ohm) 24 ohm (1KHz). Cord Length 3.94 ft
#8
- Advanced build quality and engineering
- 40 millimeter drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Tuned for enhanced detail, with excellent mid-range definition
- Circumaural design contours around the ears for excellent sound isolation in loud environments
- Convenient single-side cable exit
#9
- High Resolution Audio offers the best in audio performance, reproducing original studio master recordings more genuinely than 16bit/44.1kHz CD formats. This uncompromising quality makes High Resolution Audio the best sound companion for the music lover. These headphones meet the stringent standards required for the Hi-Res Audio stamp of quality.
- Over-the-ear Type provides good sound isolation.40mm neodymium dynamic magnet driver delivers superior quality sound, ideal for studio monitoring, podcasting and private listening.
- The soft padded ear cushions are designed for over the ear comfort and noise isolation.
- Full cushioned headband provides supreme listening comfort
- 3m optimal cable length, fit for any usage. Single-sided cable reduces tangling 3.5-6.3mm Adaptor included
#10
- [Get the bass]:The 10mm beryllium-plated diaphragm dynamic driver in the FH3 earphones was specifically chosen for its superior acoustic properties. The beryllium-plated diaphragm is not only light and thin but is also extremely rigid, allowing for thunderous yet lightning quick, responsive and dynamic bass.
- [Get the mid and high]:The FH3 headphones which is two Knowles drivers paired with a beryllium-plated dynamic driver ,placed near the opening of the sound tube, controlled by a physical + electronic frequency crossover system masterfully cover the entire frequency response range. High-frequencies: the Knowles RAD-33518 driver provides extremely clear sound with well-extended yet smooth treble. Mid-frequencies: the ED-30262 gives sweeter and fuller vocals as well as a wider soundstage.
- [S.TURBO acoustic design & balanced pressure relief technology]:The longer and smoother turbine-inspired sound tubes effectively filter unwanted high frequencies, giving one deeper and harder-hitting bass after it is combined with FiiO’s patented S.TURBO acoustic design. And the FH3 earphones utilizes FiiO’s patented balanced pressure relief technology,carefully designed so as to ensure that the air pressure in the front and rear chambers is balanced, thus making for stress-free listening.
- [High-purity monocrystalline silver-plated copper cable]:The included high-purity monocrystalline silver-plated copper cable,with 4 strands of 96 wires, was carefully chosen for its fidelity and ability to resolve details, being noticeably better than the typical earphone cable. One’s music will sound sublime with the included cable, which brings the best out of the earbuds FH3’s drivers.
- [Comfort for your ears & 3rd gen industrial design]:To make a circle of comfort for your ears,FH3 earbuds is made of a aerospace-grade aluminum-magnesium alloy shell. The 5-axis CNC precision machining ensures that the body of the FH3 is made to tight tolerances.Besides,continuing the same design as the FH series of earphones and through data on thousands of people’s ear,an extremely comfortable design for the FH3 headphones was created.
#11
- CINEMA FOR ONE: Designed for all types of media, 4th-generation Matrix headphones combine low latency technology with CinemaEAR audio enhancement to eliminate lip-syncing issues and provide the best possible audio performance not just for music, but also for movies and TV shows
- CINEMAEAR AUDIO ENHANCEMENT: Proprietary audio enhancement technology lets you switch between several hearing and sound enhancement modes at the touch of a button. Options include normal/balanced sound, Dynamic Music Mode, Bass Boost Mode, and two Clear Voice modes
- HEAR BETTER: High-resolution 40mm drivers deliver clear speech and dynamic bass while Clear Voice audio enhancement helps you hear dialogue in movies and TV shows better by boosting sound frequencies that improve clarity and speech intelligibility, even at lower volumes
- APTX LOW LATENCY TECHNOLOGY: Qualcomm aptX and aptX Low Latency codecs ensure maximum wireless audio quality and improve lip-syncing with compatible Bluetooth devices
- INCLUDES: Ultra-soft memory foam earpads, up to 30 hours of battery life, built-in headset with microphone and controls, protective carrying case, charging cable, and stereo audio cable; 1-year manufacturer’s warranty
